Oreck 2310RD Vacuum Cleaner Manual

The Oreck 2310RD is a lightweight, powerful vacuum cleaner designed for easy maneuverability and effective cleaning. It features a high-speed roller brush, a HEPA filter for capturing allergens, and a durable design suitable for various floor types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, HEPA filtration, high-speed roller brush, and various cleaning attachments.

Feature	Description
Lightweight Design	Easy to carry and maneuver around the house
HEPA Filter	Captures 99.97% of dust and allergens
High-Speed Roller Brush	Effective for deep cleaning carpets and rugs
Durable Construction	Built to withstand regular use
Various Attachments	Includes tools for upholstery and crevices

Installation

Unpack the vacuum cleaner and inspect all components.

Attach the handle: Align and secure the handle to the main body.
Connect the hose: Ensure the hose is firmly attached to the vacuum.
Plug in the power cord: Use a grounded outlet for safety.

WARNING! Ensure the vacuum is unplugged during assembly.

First-Time Setup

Power on the vacuum and familiarize yourself with the controls.

Adjust the height setting: Use the height adjustment knob for different floor types.
Check the filter: Ensure the HEPA filter is installed correctly.
Test the vacuum: Run the vacuum on a small area to ensure proper operation.

CAUTION! Do not operate the vacuum without the filter in place.

Specifications

Model: Oreck 2310RD
Weight: 8 lbs.
Filtration: HEPA filter
Power: 120V AC
Cleaning Path: 12 inches
Attachments: Crevice tool, upholstery brush
Warranty: 1 year limited warranty

Controls and Settings

Access the power switch and height adjustment settings located on the handle.

Controls: Power switch, height adjustment knob, and hose release button.

Connecting Accessories

Attach accessories to the hose for various cleaning tasks.

Turn off the vacuum before changing attachments.
Align the attachment with the hose and push until it clicks.
Remove attachments by pressing the release button.

Tip: Use the crevice tool for tight spaces and the upholstery brush for furniture.

Operating the Vacuum

Follow these steps for effective vacuuming.

Power on the vacuum using the switch.
Adjust the height setting based on the floor type.
Move the vacuum back and forth slowly for optimal cleaning.
Empty the dust container regularly to maintain suction power.

WARNING! Do not vacuum wet surfaces or liquids.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the HEPA filter monthly; replace if damaged.
Check for blockages in the hose and brush roll.
Wipe the exterior with a damp cloth.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum complies with FCC regulations for safety and performance. For support, visit www.oreck.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't start	Power cord issue	Check the power outlet and cord connections.
No suction	Clogged filter or hose	Check and clean the filter and hose for blockages.
Brush roll not spinning	Height setting too low	Adjust the height setting for the surface type.
Strange noises	Foreign object in brush	Inspect and remove any debris from the brush roll.

Reset: Unplug for 10 seconds and plug back in to reset.

Service: For assistance, contact Oreck customer service.