Oreck APU255 Vacuum Cleaner Manual

The Oreck APU255 is a lightweight and powerful vacuum cleaner designed for efficient cleaning of carpets and hard floors. It features a high-speed roller brush, a HEPA filtration system, and a compact design for easy maneuverability. Below are key sections for safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Maintenance 7. Troubleshooting

Features at a Glance

Key components: Lightweight design, HEPA filter, high-speed roller brush, adjustable suction control, and a compact storage design.

Feature	Description
HEPA Filter	Traps 99.97% of dust and allergens
High-Speed Roller Brush	Effective for deep cleaning carpets
Adjustable Suction Control	Customizes suction for different surfaces
Compact Design	Easy to store and maneuver
Lightweight	Reduces fatigue during use

Installation

Unpack the vacuum cleaner and ensure all components are included.

Attach the handle to the main body of the vacuum.
Ensure the dust bag is properly installed.
Plug the vacuum into a power outlet.

WARNING! Do not operate the vacuum without the dust bag in place.

First-Time Setup

Power on the vacuum and adjust the suction settings as needed.

Set the vacuum to the desired suction level.
Test the vacuum on a small area to ensure proper operation.

CAUTION! Always check for obstructions before use.

Specifications

Model: Oreck APU255
Weight: 8 lbs
Filtration: HEPA filtration system
Power: 120V AC
Cleaning Path: 12 inches
Noise Level: 65 dB
Warranty: 1 year limited warranty

Controls and Settings

Access the suction control dial located on the handle for adjusting suction power.

Power Button: Located on the main body for easy access.

Maintenance

Regularly check and replace the dust bag and HEPA filter as needed.

Unplug the vacuum before performing maintenance.
Remove and replace the dust bag when full.
Clean the roller brush to remove hair and debris.

Tip: Schedule maintenance every 3-6 months for optimal performance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't start	Power source issue	Check power outlet and cord connections.
No suction	Clogged hose or full dust bag	Inspect hose for clogs and replace dust bag.
Strange noise	Foreign object in roller brush	Turn off and remove any obstructions.
Dust escaping	Worn filter	Replace HEPA filter as needed.

Service: For further assistance, contact customer support at 1-800-989-ORCK.