Oreck BB1100 Vacuum Cleaner Manual

The Oreck BB1100 is a lightweight, powerful vacuum cleaner designed for easy maneuverability and effective cleaning. It features a high-speed roller brush, a HEPA filtration system, and a compact design that makes it ideal for both home and commercial use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, HEPA filtration, high-speed roller brush, easy-to-empty dust bag.

Feature	Description
Lightweight Design	Easy to carry and maneuver around furniture.
HEPA Filtration	Traps 99.97% of dust and allergens.
High-Speed Roller Brush	Effective in picking up dirt and debris from carpets and hard floors.
Easy-to-Empty Dust Bag	Convenient disposal of collected dirt.
Powerful Suction	Ensures thorough cleaning performance.

Installation

Unpack the vacuum cleaner and ensure all components are included. Follow these steps for installation:

Attach the handle to the main body of the vacuum.
Ensure the dust bag is correctly installed.
Plug the vacuum into a power outlet.

WARNING! Ensure the vacuum is unplugged when assembling or disassembling parts.

First-Time Setup

Power on the vacuum and familiarize yourself with the controls.

Adjust the height setting for different floor types.
Check the dust bag indicator to ensure it is properly installed.
Test the vacuum on a small area to ensure proper operation.

CAUTION! Do not operate the vacuum on wet surfaces.

Specifications

Model: Oreck BB1100
Weight: 8 lbs.
Filtration: HEPA filter.
Power: 120V AC, 60Hz.
Cleaning Path: 12 inches.
Dust Bag Capacity: 4 quarts.
Operating Radius: 30 feet.

Controls and Settings

Access the vacuum's controls located on the handle for easy operation. Key controls include:

Power switch
Height adjustment dial
Dust bag indicator light

Connecting Accessories

To enhance cleaning capabilities, connect the following accessories:

Upholstery tool for furniture cleaning.
Crevice tool for tight spaces.
Extension wand for hard-to-reach areas.

Tip: Ensure the vacuum is off before changing accessories.

Operating the Vacuum

Follow these steps to operate the vacuum:

Plug the vacuum into a power outlet.
Turn on the power switch.
Adjust the height setting based on the floor type.
Begin vacuuming by moving the unit back and forth.

WARNING! Do not vacuum wet surfaces or large debris.

Maintenance and Care

To ensure optimal performance, perform regular maintenance:

Check and replace the dust bag as needed.
Clean the HEPA filter regularly.
Inspect the roller brush for hair and debris.

CAUTION! Always unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum complies with FCC regulations and safety standards. For support, visit www.oreck.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't start	Power source issue	Check power outlet and cord connections.
No suction	Clogged hose or full dust bag	Inspect hose for blockages; replace dust bag.
Brush not spinning	Height setting too low	Adjust height setting for carpet.
Excessive noise	Debris in roller brush	Clean roller brush and check for obstructions.

Reset: Unplug and replug to reset the vacuum.

Service: For assistance, contact Oreck customer service.