Oreck BK95519 Vacuum Cleaner manual

The Oreck BK95519 is a lightweight and powerful vacuum cleaner designed for efficient cleaning of various surfaces. It features a high-speed roller brush, a HEPA filtration system, and a compact design for easy maneuverability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, HEPA filter, high-speed roller brush, and easy-to-empty dust container.

Feature	Description
Lightweight Design	Easy to carry and maneuver around the house.
HEPA Filtration	Traps 99.97% of dust and allergens.
High-Speed Roller Brush	Effective on carpets and hard floors.
Dust Container	Easy to empty and clean.
Power Cord	Long reach for cleaning large areas.

Installation

Unpack the vacuum and check for all components. Place the vacuum on a flat surface.

Attach the handle: Align the handle with the base and secure it.
Plug in the power cord: Ensure the outlet is functional.
Check the dust container: Ensure it is properly installed.

WARNING! Ensure the vacuum is unplugged when assembling.

First-Time Setup

Power on the vacuum; follow the setup instructions.

Check the dust container: Make sure it is empty and properly attached.
Adjust the height setting: Set according to the type of flooring.
Test the vacuum: Turn it on and check for proper operation.

CAUTION! Do not operate the vacuum without the dust container.

Specifications

Model: Oreck BK95519.
Weight: 8 lbs.
Filtration: HEPA filter.
Power: 120V AC, 60Hz.
Cleaning Path: 12 inches.
Noise Level: 70 dB.
Warranty: 1 year limited warranty.

Controls and Settings

Power switch located on the handle. Height adjustment dial for different floor types.

Maintenance: Regularly check and replace the HEPA filter as needed.

Connecting Accessories

Compatible with various Oreck accessories for enhanced cleaning.

Turn off the vacuum before connecting accessories.
Align the accessory with the connector and push until it clicks.

Tip: Use the appropriate accessory for the surface being cleaned.

Operating the Vacuum

Designed for easy operation on carpets and hard floors.

Power on: Press the power switch on the handle.
Adjust height: Set according to the flooring type.
Vacuum: Move the vacuum back and forth for effective cleaning.

WARNING! Do not vacuum liquids or wet surfaces.

Maintenance and Care

Regular maintenance ensures optimal performance.

Empty the dust container after each use.
Check and replace the HEPA filter regularly.
Clean the roller brush to remove hair and debris.

Regulatory Information

Meets safety standards for household appliances. For support, visit www.oreck.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged filter	Check and clean the dust container and filter.
Strange noise	Debris in roller brush	Turn off and remove debris from the roller brush.
Height adjustment not working	Mechanical issue	Contact customer service for assistance.

Reset: Unplug for 10 seconds to reset the vacuum.

Service: 1-800-989-ORCK; www.oreck.com