Oreck Edge CC1400 Vacuum Cleaner Manual

The Oreck Edge CC1400 is a powerful and lightweight vacuum cleaner designed for efficient cleaning on various surfaces. It features a high-speed roller brush, a HEPA filtration system, and a sleek design that makes it easy to maneuver. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, HEPA filtration, high-speed roller brush, easy-to-empty dust container.

Feature	Description
HEPA Filtration	Traps 99.97% of dust and allergens
High-Speed Roller Brush	Effective on carpets and hard floors
Lightweight Design	Easy to carry and maneuver
Easy-to-Empty Dust Container	Simplifies disposal of dirt and debris
Variable Speed Control	Adjust suction power for different surfaces

Installation

Unpack the vacuum cleaner and ensure all parts are included. Place the vacuum on a flat surface.

Attach the handle: Align and secure the handle to the main body.
Connect the power cord: Ensure it is properly plugged into a wall outlet.
Check accessories: Ensure all attachments are available for use.

WARNING! Always check for damage before use. Do not operate if damaged.

First-Time Setup

Power on the vacuum cleaner and familiarize yourself with the controls.

Adjust the handle height: Set to a comfortable position for use.
Check suction settings: Adjust according to the surface type.
Test the vacuum: Run it briefly to ensure proper operation.

CAUTION! Ensure the vacuum is unplugged when changing attachments.

Specifications

Model: Oreck Edge CC1400
Weight: 8 lbs.
Filtration: HEPA
Power: 120V AC
Cord Length: 30 feet
Cleaning Path Width: 12 inches
Warranty: 1 year limited warranty

Controls and Settings

Access controls on the handle for power and suction settings. The vacuum features a simple on/off switch and a dial for adjusting suction power.

Attachments: Various tools for different cleaning tasks are included.

Connecting Accessories

Ensure the vacuum is unplugged before connecting any accessories.

Align the accessory with the attachment point.
Push firmly until it clicks into place.
Test the connection by gently pulling on the accessory.

Tip: Use the appropriate accessory for the surface you are cleaning.

Operating the Vacuum

To operate the vacuum, simply plug it in and turn it on using the power switch.

Adjust the suction power as needed.
Move the vacuum back and forth to clean the area.
Empty the dust container when full.

WARNING! Do not block the vacuum's airflow during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the filters regularly to maintain suction power.
Check for clogs in the hose and brush roll.
Store the vacuum in a dry place when not in use.

CAUTION! Always unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards and regulations. For support, visit www.oreck.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check the power cord and outlet.
No suction	Clogged filter	Clean or replace the filter.
Strange noise	Foreign object in brush	Inspect and remove any obstructions.
Dust escaping	Damaged seal	Check for damage and replace if necessary.

Reset: Unplug for 10 seconds, then plug back in to reset.

Service: For assistance, contact Oreck customer service.