Oreck U3980H2 Vacuum Cleaner Manual

The Oreck U3980H2 is a lightweight, powerful vacuum cleaner designed for easy maneuverability and effective cleaning. It features a high-speed roller brush, a HEPA filtration system, and a durable design suitable for various floor types. Below are key sections for safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Operation 3. Maintenance 4. Specifications 5. Troubleshooting

Features at a Glance

Key components: Lightweight design, HEPA filter, high-speed roller brush, and easy-to-empty dust bag.

Feature	Description
Lightweight Design	Easy to carry and maneuver around the house
HEPA Filtration	Traps 99.97% of dust and allergens
High-Speed Roller Brush	Effective on carpets and hard floors
Easy-to-Empty Dust Bag	Convenient disposal of collected debris
Durable Construction	Built to withstand regular use

Operation

To operate the Oreck U3980H2, plug it into a power outlet, adjust the height setting if necessary, and turn it on using the power switch. Move the vacuum back and forth across the floor to clean effectively.

Plug in the vacuum cleaner.
Adjust the height setting for different floor types.
Turn on the vacuum using the power switch.
Move the vacuum in a back-and-forth motion for optimal cleaning.

WARNING! Ensure the vacuum is unplugged before performing any maintenance.

Maintenance

Regular maintenance is essential for optimal performance. Clean the filter and check the brush for debris regularly.

Unplug the vacuum before maintenance.
Remove and clean the HEPA filter as needed.
Check the roller brush for hair and debris; clean if necessary.
Replace the dust bag when full.

CAUTION! Do not use the vacuum without a dust bag or filter.

Specifications

Model: Oreck U3980H2
Weight: 8 lbs.
Filtration: HEPA filter
Power: 120V AC
Cleaning Path: 12 inches
Dust Bag Capacity: 4 quarts
Warranty: 1 year limited

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check the power cord and outlet.
No suction	Full dust bag or clogged filter	Replace dust bag or clean filter.
Brush not spinning	Debris jam	Check and clear any obstructions.
Excessive noise	Loose parts	Tighten any loose components.

Service: For further assistance, contact Oreck customer service.