Oreck XL BB870-AW Vacuum Cleaner Manual

The Oreck XL BB870-AW is a lightweight, powerful vacuum cleaner designed for easy maneuverability and effective cleaning. It features a high-speed roller brush, a HEPA filtration system, and a durable design suitable for various floor types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, HEPA filtration, high-speed roller brush, and easy-to-use controls.

Feature	Description
Lightweight Design	Easy to carry and maneuver around the house
HEPA Filtration	Traps 99.97% of dust and allergens
High-Speed Roller Brush	Effective in picking up dirt and debris
Easy-to-Use Controls	Simple operation for all users
Durable Construction	Built to withstand regular use

Installation

Unpack the vacuum cleaner and ensure all components are included.

Attach the handle: Align and secure the handle to the main body.
Install the vacuum bag: Open the bag compartment and insert the bag securely.
Plug in the vacuum: Ensure the power cord is fully extended and plugged into an outlet.

WARNING! Ensure the vacuum is unplugged during assembly to avoid injury.

First-Time Setup

Power on the vacuum and familiarize yourself with the controls.

Check the vacuum bag: Ensure it is properly installed and not full.
Adjust the height setting: Set the brush height according to your floor type.
Test the vacuum: Turn it on and ensure it operates smoothly.

CAUTION! Do not operate the vacuum on wet surfaces.

Specifications

Model: Oreck XL BB870-AW.
Weight: 8 lbs.
Filtration: HEPA filtration system.
Power: 120V AC.
Cleaning Path: 12 inches.
Warranty: 1-year limited warranty.

Controls and Settings

Access controls on the handle for easy operation. Features include power switch, height adjustment, and bag indicator.

Connecting Accessories

Compatible with various attachments for specialized cleaning tasks.

Turn off the vacuum before connecting accessories.
Align the accessory with the hose and push until it clicks into place.
Test the accessory to ensure it is securely attached.

Tip: Use the right accessory for optimal cleaning results.

Operating the Vacuum

Follow these steps for effective vacuuming.

Power on the vacuum using the switch on the handle.
Adjust the height setting based on the floor type.
Move the vacuum in a straight line, then backtrack for thorough cleaning.
Empty the vacuum bag when full to maintain suction power.

WARNING! Do not block the vacuum's airflow during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the filter regularly to maintain suction.
Check for blockages in the hose and brush roll.
Replace the vacuum bag as needed.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum complies with safety standards and regulations. For support, visit www.oreck.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check the power cord and outlet.
No suction	Full bag or blockage	Empty the bag and check for blockages.
Brush not spinning	Height setting	Adjust the height setting appropriately.
Strange noise	Foreign object	Inspect for foreign objects in the brush roll.

Reset: Unplug for 10 seconds to reset the vacuum.

Service: 1-800-989-ORCK; www.oreck.com