Oreck XL COMPACTO 6 Vacuum Cleaner Manual

The Oreck XL COMPACTO 6 is a lightweight and powerful vacuum cleaner designed for efficient cleaning of carpets and hard floors. It features a high-speed roller brush, a HEPA filtration system, and a compact design that makes it easy to maneuver and store. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, HEPA filtration, high-speed roller brush, easy-to-empty dust bag.

Feature	Description
Lightweight Design	Easy to carry and maneuver around the house
HEPA Filtration	Traps 99.97% of dust and allergens
High-Speed Roller Brush	Effective in deep cleaning carpets
Easy-to-Empty Dust Bag	Convenient disposal of collected dirt
Compact Size	Easy to store in small spaces

Installation

Unpack the vacuum and inspect contents. Ensure all parts are included.

Attach the handle: Align and secure the handle to the main body.
Install the dust bag: Open the dust compartment and insert the dust bag.
Check the power cord: Ensure it is free of damage and properly coiled.
Plug into AC power: Ensure the outlet is functional.

WARNING! Do not operate the vacuum without a dust bag installed.

First-Time Setup

Power on the vacuum and familiarize yourself with the controls.

Adjust the height: Set the roller brush height according to the floor type.
Test the suction: Turn on the vacuum and check for proper suction.
Check the brush roll: Ensure it is spinning freely.

CAUTION! Always unplug the vacuum before performing maintenance.

Specifications

Model: Oreck XL COMPACTO 6
Weight: 8 lbs.
Filtration: HEPA filtration system
Power: 120V AC, 60Hz
Cleaning Path: 12 inches
Dust Bag Capacity: 3 quarts
Warranty: 1 year limited warranty

Controls and Settings

Access controls on the handle: Power switch, height adjustment dial.

Maintenance: Regularly check and replace the dust bag and filters.

Connecting Accessories

Compatible with various attachments for specialized cleaning.

Turn off the vacuum before connecting accessories.
Align the accessory with the hose and twist to secure.
Select the appropriate accessory for the cleaning task.

Tip: Use the crevice tool for tight spaces and the upholstery brush for furniture.

Operating the Vacuum

Follow these steps for effective vacuuming:

Power on the vacuum: Press the power switch to start.
Adjust the height: Set according to the surface being cleaned.
Vacuum in straight lines: Overlap each pass for thorough cleaning.
Empty the dust bag: When full, remove and replace with a new bag.

WARNING! Do not vacuum wet surfaces or liquids.

Maintenance and Care

Regular maintenance ensures optimal performance.

Check and replace the dust bag regularly.
Clean the filters as needed.
Inspect the brush roll for hair and debris.
Store in a dry place when not in use.

Regulatory Information

This vacuum complies with FCC regulations for household appliances. For support, visit www.oreck.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't start	Power cord issue	Check power outlet and cord for damage.
No suction	Full dust bag	Replace dust bag and check for clogs.
Brush roll not spinning	Height setting	Adjust height setting or check for blockages.
Strange noises	Debris in brush roll	Turn off and clear any debris.

Reset: Unplug for 10 seconds to reset the vacuum.

Service: 1-800-989-ORCK; www.oreck.com