Oreck XL2250RS Vacuum Cleaner Manual

The Oreck XL2250RS is a lightweight, powerful vacuum cleaner designed for easy maneuverability and effective cleaning. It features a top-fill design, a high-speed roller brush, and a HEPA filtration system that captures 99.97% of dust and allergens. Below are key sections for safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Operation 3. Maintenance 4. Specifications 5. Troubleshooting

Features at a Glance

Key components: Lightweight design, HEPA filtration, high-speed roller brush, and a 30-foot power cord.

Feature	Description
Lightweight Design	Easy to carry and maneuver around furniture.
HEPA Filtration	Traps 99.97% of dust and allergens.
High-Speed Roller Brush	Effective cleaning on carpets and hard floors.
30-Foot Power Cord	Extended reach for larger areas without frequent unplugging.
Top-Fill Design	Ensures maximum suction power until the bag is full.

Operation

To operate the Oreck XL2250RS, plug it in and turn on the power switch. Adjust the height setting if necessary for different floor types.

Plug in the vacuum cleaner.
Turn on the power switch located on the handle.
Adjust the height setting for optimal cleaning.
Move the vacuum back and forth to clean the area.

WARNING! Always ensure the vacuum is unplugged before performing maintenance.

Maintenance

Regular maintenance is essential for optimal performance. Clean or replace the vacuum bag and filter as needed.

Check the vacuum bag regularly and replace when full.
Clean the HEPA filter every 6 months.
Inspect the roller brush for hair or debris and clean as necessary.
Store the vacuum in a dry place when not in use.

Specifications

Model: Oreck XL2250RS.
Weight: 8 lbs.
Filtration: HEPA filtration system.
Power Cord Length: 30 feet.
Cleaning Path Width: 12 inches.
Motor: High-speed motor for powerful suction.
Warranty: 1-year limited warranty.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No suction	Full vacuum bag or clogged filter	Replace bag or clean filter.
Vacuum is noisy	Debris in roller brush	Inspect and clean roller brush.
Power cord damaged	Wear and tear	Replace power cord.
Vacuum won't turn on	Power supply issue	Check outlet and power switch.

Service: For further assistance, contact Oreck customer service.