Oreck XL2600HH Vacuum Cleaner Manual

The Oreck XL2600HH is a lightweight, powerful vacuum cleaner designed for easy maneuverability and effective cleaning. It features a high-speed roller brush, a HEPA filtration system, and a low-profile design that allows it to reach under furniture with ease. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, HEPA filtration, high-speed roller brush, and low-profile nozzle.

Feature	Description
Lightweight Design	Easy to carry and maneuver around the house.
HEPA Filtration	Traps 99.97% of dust and allergens.
High-Speed Roller Brush	Effective in picking up dirt and debris from carpets and hard floors.
Low-Profile Nozzle	Reaches under furniture and tight spaces.
Easy-to-Empty Dust Bag	Convenient disposal of collected dirt.
On/Off Switch	Easy access for quick operation.

Installation

Unpack the vacuum cleaner and ensure all components are included.

Attach the handle to the main body of the vacuum.
Ensure the dust bag is installed correctly.
Plug the vacuum into a power outlet.

WARNING! Do not use the vacuum near water or wet surfaces.

First-Time Setup

Power on the vacuum; ensure the dust bag is in place.

Check the power cord for any damage before use.
Adjust the height setting if applicable for different floor types.
Familiarize yourself with the controls and features.

CAUTION! Ensure the vacuum is unplugged when changing the dust bag.

Specifications

Weight: 8 lbs.
Filtration: HEPA filtration system.
Power: 120V AC.
Cleaning Path: 12 inches.
Dust Bag Capacity: 4 quarts.
Noise Level: 70 dB.
Warranty: 1 year limited warranty.

Controls and Settings

Access the power switch and height adjustment settings on the vacuum body.

Handle Controls: On/Off switch, height adjustment lever.

Ensure the vacuum is set to the correct height for optimal cleaning performance.

Connecting Accessories

Various accessories can be attached for specialized cleaning tasks.

Turn off the vacuum before attaching accessories.
Align the accessory with the connector and push until it clicks into place.
Select the appropriate accessory for the cleaning task.

Tip: Use the crevice tool for tight spaces and the upholstery brush for furniture.

Operating the Vacuum

Follow these steps to operate the vacuum effectively.

Plug the vacuum into a power outlet.
Turn on the vacuum using the power switch.
Adjust the height setting if necessary.
Begin vacuuming by pushing the unit forward.
For best results, vacuum in straight lines and overlap each pass.

WARNING! Do not vacuum wet surfaces or liquids.

Maintenance and Care

Regular maintenance ensures optimal performance of your vacuum.

Empty the dust bag when full.
Check and clean the roller brush regularly.
Inspect the power cord for any damage.
Store the vacuum in a dry place.

CAUTION! Always unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards and regulations. For support, visit www.oreck.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord for damage.
No suction	Full dust bag	Empty the dust bag and check for clogs.
Brush not spinning	Blocked roller brush	Remove debris and clean the roller brush.
Excessive noise	Loose parts	Inspect for loose components and tighten as needed.

Reset: Unplug the vacuum for 10 seconds and plug it back in.

Service: 1-800-989-ORCK; www.oreck.com