Oreck XL2700RH Vacuum Cleaner Manual

The Oreck XL2700RH is a lightweight, powerful vacuum cleaner designed for easy maneuverability and effective cleaning. It features a high-speed roller brush, a HEPA filtration system, and a sleek design that makes it perfect for both carpets and hard floors. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, HEPA filtration, high-speed roller brush, easy-to-empty dust bag.

Feature	Description
Lightweight Design	Easy to carry and maneuver around the house
HEPA Filtration	Traps 99.97% of dust and allergens
High-Speed Roller Brush	Effective cleaning on carpets and hard floors
Easy-to-Empty Dust Bag	Convenient disposal of collected dirt
Powerful Suction	Ensures thorough cleaning

Installation

Unpack and inspect contents. Ensure all parts are included.

Attach the handle: Align and secure the handle to the main body.
Check the dust bag: Ensure it is properly installed.
Plug into AC power: Ensure the vacuum is turned off before plugging in.

WARNING! Do not use the vacuum on wet surfaces; ensure all connections are secure.

First-Time Setup

Power on the vacuum and familiarize yourself with the controls.

Adjust the height setting: Set according to your floor type.
Test suction: Turn on the vacuum and check for proper suction.
Check brush rotation: Ensure the roller brush is spinning correctly.

CAUTION! Ensure the vacuum is on a stable surface during setup.

Specifications

Weight: 8 lbs.
Filtration: HEPA filter.
Power: 120V AC, 60Hz.
Cleaning Path: 12 inches.
Dust Bag Capacity: 4 quarts.
Noise Level: 70 dB.
Warranty: 1 year limited warranty.

Controls and Settings

Access controls on the handle: Power switch, height adjustment, and brush roll activation.

Maintenance: Regularly check and replace the HEPA filter and dust bag.

Connecting Accessories

Compatible with various attachments for specialized cleaning tasks.

Turn off the vacuum before connecting accessories.
Align and secure attachments to the hose or wand.

Tip: Use the appropriate attachment for the surface being cleaned.

Operating the Vacuum

Follow these steps for effective operation:

Power on: Press the power switch to turn on the vacuum.
Adjust height: Set the height according to the floor type.
Vacuum: Move the vacuum back and forth across the surface.
Empty dust bag: Check and empty the dust bag when full.

WARNING! Do not block the suction inlet; keep hair and debris away from the roller brush.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the HEPA filter regularly.
Replace the dust bag when full.
Check for blockages in the hose and brush roll.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2026 Oreck; trademarks of Oreck Corporation. For support, visit www.oreck.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't start	Power cord issue	Check power connection and cord for damage.
No suction	Clogged hose or full dust bag	Clear any blockages and replace dust bag if necessary.
Brush roll not spinning	Height setting too low	Adjust height setting for the surface type.
Excessive noise	Debris in brush roll	Check and clean brush roll of any entangled debris.

Reset: Unplug for 10 seconds and plug back in to reset.

Service: 1-800-989-ORCK; www.oreck.com